Hi-Pot Tester Transformer Inductor Relay Winding Coil Insulation Tester (Ss7122 Series tester eeplace EXTECH tester)

• Customization: Available
• After-sales Service: Online Support
• Function: Storage, Cleared, Hi-Pot Tester
• Model NO.: SS7122 Series
• Display: Digital
• Usage: Electric Component Tester
• Type: Transformer Tester
• Environment: Room Temperature
• Warranty: With Warranty
• Power Source: AC 85V-265V
• Weight: 0-10Kg
• Installation: Direct Connected
• Customized: Customized
• After Sales Service: Online Support
• Output Rating: 5kvac/12mA
• Output Voltage(Kvac): 0-5.00
• Output Frequency: 50Hz/60Hz ± 100ppm
• Transport Package: Standard Wooden Case
• Trademark: SANSHINE
• Origin: Xiamen China
• HS Code: 9030339000
• Production Capacity: 10000/Set
• Package Size: 28.00cm * 9.00cm * 37.00cm
• Package Gross Weight: 9.000kg

Product Description

 

Detailed Photos

Product Description

The SS71XX series high voltage withstand and insulation teter( HI-POT tester) is used for testing insulation grade and withstanding voltage capability of electrical equiment, transformers, motor, relays, cables, electronic components, electronics applications, inductors, ignition coils, insulation wires, insulation tapes, valve coils, reactors,contactors, etc. .
Features :
Compact size and light weight

Four test modes available, W, I, W-I, I-W

Linkable to Ground Bond Tester

Capable of storing 5sets of testing conditions

Electronic ramp up and dwell time for up to 999.9 seconds

Front panel lockout

Built-in PLC Remote interface

Front panel software calibration

Easy to operate

Model		SS7122	SS7120		SS7112		SS7110
AC WITHSTAND VOLTAGE
Output Rating		5KVAC/12mA
Output Voltage, KVAC		Range	Resolution		Accuracy
		0-5.00	0.01		± (2% of setting + 5V)
Output Frequency		50Hz/60Hz ± 100ppm, User Selection
Output Waveform		Sine Wave, THD. < 2% (Resistive Load), Crest Factor = 1.3 - 1.5
Output Regulation		± (1% of output + 5V), From no load to full load
SETTINGS
Hi-Limit AC Current, mA		0.10 - 12.00	0.01		± (2% of setting + 2counts)
Lo-Limit AC Current, mA		0.00 - 12.00	0.01		± (2% of setting + 2counts)
Ramp Time, second		0.1 - 999.9	0.1		± (0.1% + 0.05sec)
Dwell Time, second		0, 0.2 - 999.9 ( 0=continuous)	0.1
Arc Detection		0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity)
DC WITHSTAND VOLTAGE (7120, 7122 ONLY)
Output Rating		6KVDC/5mA
Output Voltage, KVDC		0 - 6.00		0.01		± (2% of setting + 5V)
Output Ripple		< 5%(6KV/5mA at Resistive Load)
SETTINGS
Hi-LimitDCCurrent, mA		0.02 - 5.00		0.01		± (2% of setting + 2counts)
Lo-LimitDCCurrent, mA		0.00 - 5.00		0.01		± (2% of setting + 2counts)
Ramp Time, second		0.1 - 999.9		0.1		± (0.1% + 0.05sec)
Dwell Time, second		0, 0.2 - 999.9 (0=continuous)		0.1
Arc Detection		0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity)
Discharge Time		< 200 msec
INSULATION RESISTANCE (7112, 7122 ONLY)
Output Rating		1KVDC/1000MΩ
Output Voltage, KVDC		0.10 - 1.00		0.01		± (2% of setting + 2V)
SETTINGS
Hi-Limit Resistance, MΩ		0, 1 - 1000 (0=OFF)		1		± (3% of setting+2counts)at > 500VDC ± (7% of setting +2counts)at < 500VDC
Lo-Limit Resistance, MΩ		1 - 1000		1
Delay Time, second		0, 0.5 - 999.9 (0=continuous)		0.1		± (0.1% + 0.05sec)
MEASUREMENT
AC/DC Voltage, KV		0 - 6.00		0.01		± (2% of reading + 1count)
DC Voltage, KV (IR only)		0.10 - 1.00		0.01		± (2% of reading + 2V)
AC Current, mA		0.10 - 12.00		0.01		± (2% of reading + 2counts)
DC Current, mA		0.02 - 5.00		0.01		± (2% of reading + 2counts)
Resistance, MΩ		1 - 1000 (Auto Range)		0.001 0.01 0.1		± (3% of reading+2counts)at > 500VDC ± (7% of reading +2counts)at < 500VDC
GENERAL
Input Voltage AC		110/220Vac± 15%, 50/60Hz ± 5%, Fuse 3A Fast
PLC Remote Control		Input: Test, Reset
		Output: Pass, Fail, Processing
Memory		5 Sets Store/Recall  of each Memory, 4 Test Mode Selectable (W, I, W I, I W Only 7112, 7122)
Display		16× 2 LCD with back light
Key Lock		To prevent unauthorized alteration of the test Parameters
Calibration		Build-in software and external calibrated meters
Environment		0-40º C, 20-80%RH
Dimension/Net Weight		280mm(W)× 89mm(H)× 370mm(D)/ 9Kg
STANDARD ACCESSORIES
Power Cord(10A)		× 1
Fuses		× 3 (Including a spare contained in the fuse holder)
High Voltage Test Cable(1101)		× 1
Return Test Cable(1102)		× 1

 

Our Services

Service tenet
Provide you the best service with "fast + satisfactory + safe".
Warranty period
12 months long after the user received the product.
Warranty items
Only for abnormal breakdown caused by the machine design or manufacture defect,
free repair and accessory will be provided.
Technology service ability
All service engineers with many years experience are gotten special technology training, who can deal with various breakdown problem.
Guide the user to use accurately and how to maintain the product.
Provide free consultation about production process technology of electronic products.
Service after sell
In order to guarantee the machine used normally, we'd have training on how to operate, use and maintain our product by English manual, video, guiding on line.
Use instruction
Apply for the right complete size of product, otherwise, the wrong dimensions will affect the use effect.
Do ensure using the product accord to the use instruction completely.Do not exceed the scope of application of the products.
Maintain the product after use,Damp proof, rust proof, leak proof, explosion-proof, regular maintenance and inspection should    
be taken care. All done help to extend the use period.
User document management
Establish perfect user document management in EPR system, Every product running details would be followed to manage.    The users would be taken good care.
About product
1. Product photo: All product photos are taken by real product, There is the color aberration between the product and photo, which is caused by shoot light, product size, manual technology and computer display etc. It's not quality problem. Parts of products are changed in appearance due to technology revolutionary and process improvement. SanShine would ensure the parameter of product is unchanged, The product couldn't affect to use.
2.Product size: All parameters are all measured by manual just for reference. There is a small deviation due to the difference of measure tools, lot products and produce process. Real size should be accordance with the final delivery product.
3.Quality inspection: All products should be inspected strictly before shipment. Ensure the good function and appearance.
 
 

Packaging & Shipping

Package and transport
General package(Paper carton or plastic bag):  For small goods, Package it with form and pack paper to guarantee unbroken during the transport.
Wooden case package: For larger scale goods as machine equipment etc, we have special skilled carpenter, who would make the proper wooden case with exact thickness,density,length. The up arrow ↑marked on the outer wooden case. Buffer material would be put in the wooden case to prevent crack and shock. We will inform you the delivery note. You just need to wait for phone call, then pick up the goods at the nearest logistic station .(Please let me know in advance if you want get the goods at home.)

 

Our Customers